A grooved rubber contact wheel with hub.
SPAP Soucille offers a grooved rubber contact wheel with hub in the dimensions most commonly used on cutlers' backstands.With a width of 38 or 50 mm, they are available in diameters of 100, 150, 200, 250 and 300 mm with a 22 or 25 mm bore hub.
...
SPAP Soucille offers a grooved rubber contact wheel with hub in the dimensions most commonly used on cutlers' backstands. With a width of 38 or 50 mm, they are available in diameters of 100, 150, 200, 250 and 300 mm with a 22 or 25 mm bore hub.
The grooved rubber contact wheel with hub for multiple applications.
With their 45° inclined splines, these grooved rubber contact wheels with hub are a good compromise for consistent material removal or finishing work on ferrous or non-ferrous metals. The medium hardness teeth (60 Shore) spaced at 7 to 8 mm for a height of 7 mm allow the use of coarse grit abrasive belts as well as fine grit or very fine grit for more delicate work. The 7 or 8 mm wide splines offer an ideal support point for knife backstand work.
Robustness and longevity of our grooved rubber contact wheels with hub.
Conceived for a maximum longevity, our grooved rubber contact wheels with hub are made up of an aluminum wheel and a rubber coating of a specific chemical composition of high resistance to hydrocarbons. These grooved rubber contact wheels with hub can be installed on manual and automatic machines or on robotized systems, both in dry and wet environments.
A wide shoulder for these grooved rubber contact wheels with hub.
A wide shoulder reinforces the hub of these grooved rubber contact wheels with hub for a perfectly stable axle mounting. Bored in the center to a diameter of 22 or 25 mm, the most common in cutlery workshops, the generous thickness of the hub allows you to include your own standardized ball bearings.
Copyright 3801 - Reproduction in whole or in part is prohibited without permission from SPAP SOUCILLE.